STAINLESS STEEL CUT WIRE

Stainless Steel Cut Wire is produced by cutting stainless steel wire into pellets, the length equal to the diameter of the wire. Stainless Steel Cut Wire is available manufactured from 304 and 430 series stainless steels.
Stainless Steel Cut Wire is available as cut for finishing processes and conditioned.Spherical Conditioned for peening applications. Due to the solidity of each particle, Stainless Steel Cut Wire has a longer life than cast stainless steel shot.

Available Size
0.3 mm. 0.6mm.
0.4 mm. 0.7 mm.
0.5 mm 0.8 mm

Application :

Deflashing, deburring and surface finishing of aluminium castings and die castings without imparting ferrous particles and dust onto the surface that can discolour. Shot peening of non ferrous components that cannot tolerate any ferrous contamination. Shot peening repeatability is improved due to durability of the particles.
Surface finishing of a variety of stainless steel fabrications and castings, producing a bright luster, orange peel finish

Chemicals Composition :

Detail Cr Si Mn P S Ni C
SUS 304 17.0-19.0% 1.5 - 2.0% 0.9 - 1.2% <= 0.45% <= 0.3% 8.5-10.5% 0.06-0.08%
SUS 430 16 - 18% <= 1.2% <= 1.0% <= 0.45% <= 0.3% - <= 0.1%
Detail Hardnes (HV) Boiling Point Specific Gravity Colour
SUS 304 400 -600 3000°F 7.95g/cm 3 Silver
SUS 430 300 - 450 3000°F 7.75g/cm 3 -

Specification :

SIZE MICRONS
10 0 - 200
20 90 - 300
30 140 - 500
40 400 - 800
50 600 - 1000
60 700 - 1250
100 1000 - 1400
150 1250 - 1700
200 1400 - 2000
300 1700 - 3000

Packing : 25kg/bag,

Tel : 02 906 5791-2

Fax : 02 906 7954